Description
- The BP-102 Blood Pressure Transducer System with integral 3cc flush device and stopcock.
- The BP-102 Blood Pressure Transducer can be used to measure direct arterial or venous pressure in animals.
- A precision laser-trimmed chip provides accurate and linear measurements over a broad range. The BP-100 requires either a signal conditioner or an iWorx computer interface with a transducer input.
Accessories :
- Blood Pressure Analysis Module
- A-PE-50 : PE-50 tubing, fits 22ga, .023x.038in
- A-BNL-22: 22guage Blunt needle with Luer connector
- BP-CalKit: Calibration kit for the BP-100
| BP-102 Specifications | |
|---|---|
| Operating Pressure | 0 to +300 mmHg |
| Over Pressure | -500 to +500 mmHg |
| Sensitivity | 5 uV/V/mmHg |
| Excitation Voltage | +/- 4 VDC |
| Temperature Effect | +0.25 mmHg/degrees C |
| Input Impedance | 270 ohms to 400 ohms |
| Output Impedance | 270 ohms to 400 ohms |
| Operating Temp. | 15° C to 40° C |
