Description
Consists of two Single Guide Cannulas for Mice. The two pedestals are secured at the end-user’s specified center-to-center distance (c/c distance) to a thin (0.5mm thick) plastic plate (G11). We can make these with any of our Single Cannulas for Mice at any c/c distance greater than 3.5.
For center-to-center distances of 3.5mm to 4.2mm, only a wire with the end bent over the pedestal can be used as a dummy cannula.
For center-to-center distances up to 6.1mm, you will have to use PE50 tubing with your Internal/injector cannulas. For c/c distances greater than 6.1mm, two single Connector Assemblies may be used simultaneously.
Example of wording when ordering: C315GS-4(2)-5.8
(meaning 2 of the single C315GS-4’s set on the G11 plate at a c/c distance of 5.8mm)
| PART NUMBER | TUBING SIZE | PEDESTAL LENGTH MM (IN) | TUBING LENGTH BELOW PLATE MM (IN) | C/C DISTANCE (FROM 3.6MM – 10.0MM) | TUBING ID MM (IN.) | TUBING 0D MM (IN.) | USES 2 INTERNALS | USES 2 DUMMYS |
| C313GS-2(2)-C/C/SPC | 22 | 2 (.08) | SPECIFY | SPECIFY | .39 (.016) | .71 (.028) | C313IS-2 | C313DCS-2/SPC |
| C313GS-4(2)-C/C/SPC | 22 | 4 (.16) | SPECIFY | SPECIFY | .39 (.016) | .71 (.028) | C313IS-4 | C313DCS-4/SPC |
| C313GS-5(2)-C/C/SPC | 22 | 5 (.20) | SPECIFY | SPECIFY | .39 (.016) | .71 (.028) | C313IS-5 | C313DCS-5/SPC |
| C315GS-2(2)-C/C/SPC | 26 | 2 (.08) | SPECIFY | SPECIFY | .24 (.010) | .46 (.018) | C315IS-2 | C315DCS-2/SPC |
| C315GS-4(2)-C/C/SPC | 26 | 4 (.16) | SPECIFY | SPECIFY | .24 (.010) | .46 (.018) | C315IS-4 | C315DCS-4/SPC |
| C315GS-5(2)-C/C/SPC | 26 | 5 (.20) | SPECIFY | SPECIFY | .24 (.010) | .46 (.018) | C315IS-5 | C315DCS-5/SPC |
