Description
Guides a Double Internal Cannula to the injection site. Consists of a square or cylindrical plastic pedestal molded around two pieces of stainless steel tubing that extend below the pedestal. The pedestal is secured with cranioplastic cement and mounting screws. Available center-to-center distances (C/C Dist.) between the stainless steel tubing are: 1.0 mm, 1.5 mm, 2.0 mm, 2.4 mm, 2.5 mm, 3.0 mm, 3.8 mm, 5.0 mm, and 8.6 mm.
Uses 303DCFT or 303DC/1 dustcap.
A Dacron mesh option is also available if needed as an attachment to the guide pedestal.
Note! There is no Connector Assembly for the C232G/5.0. – use PE50 tubing.
I.D. of 22ga tubing =.39 mm (.0155″) O.D. of 22ga tubing =.77 mm (.028″)
| PART NUMBER |
TUBING SIZE (GAUGE) |
TUBING LENGTH BELOW PEDESTAL MM (IN.) |
C/C DIST. MM (IN.) |
PEDESTAL HEIGHT MM (IN.) |
PEDESTAL WIDTH MM (IN.) |
PEDESTAL DIAMETER MM (IN.) |
USES INTERNAL CANNULA |
USES DUMMY CANNULA |
| C232G-1.0/SPC | 22 | Custom | 1.0 (.039) | 8.0 (.315) | 6.12 (.240) | 6.12 (.240) | C232I/SPC | C232DC |
| C232G-1.5/SPC | 22 | Custom | 1.5 (.059) | 8.0 (.315) | 6.12 (.240) | 6.12 (.240) | C232I/SPC | C232DC |
| C232G-2.0/SPC | 22 | Custom | 2.0 (.079) | 8.0 (.315) | 6.12 (.240) | 6.12 (.240) | C232I/SPC | C232DC |
| C232G-2.4/SPC | 22 | Custom | 2.4 (.094) | 8.0 (.315) | 6.12 (.240) | 6.12 (.240) | C232I/SPC | C232DC |
| C232G-2.5/SPC | 22 | Custom | 2.5 (.098) | 8.0 (.315) | 6.12 (.240) | 6.12 (.240) | C232I/SPC | C232DC |
| C232G-3.0/SPC | 22 | Custom | 3.0 (.118) | 8.0 (.315) | 6.12 (.240) | 6.12 (.240) | C232I/SPC | C232DC |
| C232G-3.8/SPC | 22 | Custom | 3.8 (.150) | 10.41 (.410) | 6.12 (.240) | 6.12 (.240) | C232I/SPC | C232DC |
| C232G/5.0/SPC | 22 | Custom | 5.0 (.197) | 8.0 (.315) | 7.7 (.303) | 7.7 (.303) | C232I/5/SPC | C232DC/5 |
| *C232G/8.6/SPC | 22 | Custom | 8.6 (.339) | 8.7 (.373) | 14.75 (.580) | 4.50 (.177) | (2)C313I | (2)C313DC/1 |
*NOTE: This C/C distance requires two single C313I and two singles C313DC/1.
