Description
Guides a Double Internal Cannula to the injection site. Consists of a threaded cylindrical plastic pedestal or a square pedestal. The pedestal is molded around two pieces of stainless steel tubing that extend below the pedestal. The pedestal is secured with cranioplastic cement and mounting screws. Available center-to-center distances (C/C Dist.) between the stainless steel tubing are: 0.5 mm, 0.8 mm, 1.0 mm, 1.2 mm, 1.5mm and 2.0 mm. Uses 303DCFT or 303DC/1 dust cap.
A Dacron mesh option is also available if needed as an attachment to the guide pedestal.
Tubing ID: .24 mm (0095″). Tubing OD: .46mm (018″).
| PART NUMBER | TUBING LENGTH BELOW PEDESTAL MM (IN.) | C/C DIST. MM (IN.) | PEDESTAL HEIGHT MM (IN.) | PEDESTAL DIAMETER MM (IN.) | USES INTERNAL CANNULA | USES DUMMY CANNULA |
| C235G-0.5/SPC | Custom | 0.5 (.020) | 8.0 (.315) | 3.5 (.138) | C235I/SPC | C235DC |
| C235G-0.8/SPC | Custom | 0.8 (.030) | 8.0 (.315) | 3.5 (.138) | C235I/SPC | C235DC |
| C235G-1.0/SPC | Custom | 1.0 (.039) | 8.0 (.315) | 3.5 (.138) | C235I/SPC | C235DC |
| C235G-1.2/SPC | Custom | 1.2 (.047) | 8.0 (.315) | 3.5 (.138) | C235I/SPC | C235DC |
| C235G-1.5/SPC | Custom | 1.5 (.060) | 8.0 (.315) | 3.5 (.138) | C235I/SPC | C235DC |
| C235G-2.0/SPC | Custom | 2.0 (.079) | 8.0 (.315) | 3.5 (.138) | C235I/SPC | C235DC |
| C235G-2.2/SPC | Custom | 2.2 (.087) | 8.0 (.315) | 6.12 (.240) | C235I/SPC | C235DC |
| C235G-3.0/SPC | Custom | 3.0 (.118) | 8.0 (.315) | 6.12 (.240) | C235I/SPC | C235DC |
