Small Animal Heater Controller system with a 6” x 8” heated bed


SKU: SA-TCS-6 Category:


SA-TCS-6 : Complete Small Animal Heater Controller with a
x 8” heated bed.

The SA-TCS-6 is suitable for small rodents such as mice and small rats.

The SA-TCS-6 includes:

  • TCS-100 Temperature controller
  • 6″ x 8″ heated bed with an built-in thermistor for
    monitoring bed temperature
  • K-type thermocouple for measuring the temperature of the

The TCS-100 Temperature
Controller is a temperature modulated heating system.
The heater output is controlled by an
analog circuit to reduce noise.
Unlike other heater controllers
which switch the power on and off,
causing spikes in the recording. The amount of power supplied
to the heated bed depend on the temperature difference between the
animal and the set temperature. As the temperature of the
animal approches the set temperature the power supplied to
the heated bed reduces. The top of the heated bed is a
grounded aluminium plate, which also isolated any noise from the
heating circuit. The system is specifically design to allow
noise free recording of bio potentials from a rodent.

The graph below shows that the noise recorded by the system is
practically unchanged
TCS-100 noise

The K-type thermocouple(TC) is typically used for setting the temperature. The heated bed includes a thermiostor which measures the temperature of the bed, and this thermistor can be used as an temperature set point in the absense of the thermocouple.

A temperature analog output can be used to record the temperature with a data acquisition system.